Power Supply
PS24
| Specifications | ||
|---|---|---|
Optional tinned leads output termination is available Part Number is PS24-TL. High efficiency, universal input switching supply. IEC 320/13 AC connector. |
||
| Input: | 90 VAC to 264VAC Universal; AC input frequency: 47Hz to 63Hz |  |
| Output: | 30 Watts | |
Current Source
CS100
| Specifications | ||
| Input: | 24volt DC |  |
| Output: | 14.4 Watts | |
Optional intensity control is available, Part Number is CS100-IC Nut Channel For M6 centered on Bottom of unit |
||
CS300
| Specifications | |
|---|---|
Optional intensity control is available, Part Number is CS300-IC Nut Channel For M6 centered on Bottom of unit |
|
| Input: | 24volt DC |
| Output: | 28.8 Watts |
Intensity Controller
CS410
| Specifications | ||
| Input: | 12-24volt DC |  |
| Output: | 30 Watts | |
| Provides independent intensity control for two lights. RS-232 programmable Industrialized power input terminal block as well as conventional DC Jack. |
||
CS420
| Specifications | ||
| Input: | 12-24vlot DC |  |
| Output: | 30 Watt | |
| Identical to the CS410, with an addition of a user interface providing 3 buttons and a three digit display. | ||
MS210
| Specifications | ||
| Input: | 12-24volt DC |  |
| Output: | 30 Watts | |
Provides independent control of four separate channels. Dual slaved outputs. RS-232 programmable. Power input terminal block as well as conventional DC jack. |
||
MS220
| Specifications | ||
| Input: | 12-24volt DC |  |
| Output: | 30 Watts | |
| Identical to the MS410, with an addition of a user interface providing 3 buttons and a three digit display. | ||
Strobe Controllers
S4000
| Specifications | ||
| Input Power: | 24VDC @ 1.25A max. with overload protection |  |
| Output Power: | Continuous max. 40ma @ 30V/Channel | |
| Impulse: | max. 4A @ 100V/Channel (On Time and Duty Cycle limits) | |
| Trigger inputs: | TTL level positive and negative edge trigger | |
| Controller provides a fast rise time and high current pulses. Provides RGB (all color) light heads with independent power level controls for up to four channels within each light head. RS-232 programmable |
||
S6000
| Specifications | ||
| Input Power: | 24VDC @ 1.25A max. with overload protection |  |
| Output Power: | Continuous max. 40ma @ 30V/Channel | |
| Impulse: | max. 4A @ 100V/Channel (On Time and Duty Cycle limits) | |
| Trigger inputs: | TTL level positive and negative edge trigger | |
| Controller provides a fast rise time and high current pulses. Two independently controlled light head output are provided. Provides RGB (all color) light heads with independent power level controls for up to four channels within each light head. RS-232 programmable |
||
Pulsar 710
High Current Strobe Controller
| Specifications | |||
| 100 Amps @ 100 Volts total output in strobed mode 8 Amps @ 24 Volts total output in constant mode Software enables user to:
|
|||
| Additional Info Pulse Parameter: On Time; Delay Time; Stop Time; Off Time; or Hold Time Operating Temp: 0-50° C Meets CE standards |